Page 7 - Masterdistrib_Pipe_Hanger_Catalog
P. 7
BEAM CLAMPS
Click on any Part# for additional product details
UNIVERSAL BEAM CLAMPS - 5100 Series
SIZE RANGE: 3/8" through 7/8" rod sizes
MATERIAL: Malleable iron casting with a hardened cup
point set screw and lock nut
FINISH: Black
ORDERING: Specify rod size; finish; and Part Number
APPROVALS: UL Listed for top or bottom Beam. FM
Approved for NFPA 13, maximum rated
pipe size. Complies with Manufacturers
Standardization Society SP-69 (Type 19 & 23)
FUNCTION: Recommended for attaching hanger rod to
top or bottom flange of a beam or bar joist,
where the thickness of a joist or flange does
not exceed 3/4 inch. The open back design
permits rod adjustment.
INSTALLATION: Must install in an upright position
ALSO AVAILABLE IN: Electro Galvanized, 304 Stainless Steel,
316 Stainless Steel & Hot Dipped Galvanized
Follow maximum recommended set
screw torque values per MSS-SP-69
PHOTO REFERENCE Maximum
Appox WT. Recommended
PART # A B C D E F G per 100 pcs Load (lbs.) Carton
Qty
5103-101 3/8" 1" 1-1/2" 1/2" 1" 3/4" 7/8" 33 lbs 400 lbs 100
5104-101 1/2" 1" 1-1/2" 1/2" 1" 3/4" 7/8" 33 lbs 500 lbs 100
5105-101 5/8" 1-1/2" 1-1/2" 1/2" 1" 3/4" 1" 22 lbs 600 lbs 50
5106-101 3/4" 1-7/8" 1-3/4" 5/8" 1-3/8" 1" 1-1/4" 88 lbs 800 lbs 50
5107-101 7/8" 2" 1-3/4" 5/8" 1-1/2" 1" 1-1/4" 79 lbs 1200 lbs 25
EMAIL: PHONE: 330-220-3600 1
SALES@MASTERD.US FAX: 330-220-3641
© 2020 MASTER DISTRIBUTION - ALL RIGHTS RESERVED.
